Head Stud Set nickled for VW 16V EA827

VW 16V EA827 Pro-Series 18.8 cylinder head stud bolt set

Increase the reliability and performance of your VW 16V EA827 engine with the Pro-Series 18.8 cylinder head stud bolt set. This set replaces the original cylinder head bolts with high-strength stud bolts that have been specially developed for powerful performance increases.

Maximum strength and reusability
With high performance upgrades, there is a risk that the original cylinder head bolts will elongate during operation and the cylinder head may lift off. The Pro-Series 18.8 stud bolts with a tensile strength of 1850 N/mm² offer the necessary stability to prevent this problem. Another advantage: These stud bolts do not need to be replaced after disassembly and can be reused.

Technical details and advantages
Part number: P101081010.VN
Kit contents:
10 stud bolts (M11)
10 nuts (M11)
10 washers
Assembly lubricant
Assembly instructions

Tensile strength:
Pro-Series 18.8 steel
1850+ N/mm² (270,000+ PSI)

High quality materials:
Special steel for maximum strength
Nickel coating or optional black oxidation for optimum corrosion protection
Threads are rolled instead of cut, which increases the strength of the tooth flanks by approx. 30%

Simple assembly:
Hexagon socket drive for easy screwing in of the stud bolts
Cone on the engine block side to protect the threads
Nuts and washers included in the set, also with a tensile strength of 1850 N/mm²

Perfect for performance upgrades
This set is essential for anyone who wants to maximise the performance of their VW 16V EA827 engine. Thanks to the high tensile strength and special design of the stud bolts, the cylinder head remains firmly in place even under the highest loads. Ideal for racing and performance orientated applications.

Application list
Year of construction 1973-2013:
Audi 80 B1 Type 82: 1.3L, 1.5L, 1.6L - 55 hp, 75 hp, 85 hp, 100 hp, 110 hp
VW Corrado type 53i: 1.8L G60 PG - 160 hp, 2.0L 16V 9A - 136 hp
VW Golf II (Type 19E/1G1): 1.8L 16V PL - 129 hp, G60 PG - 160 hp
VW Golf III (Type 1H): 2.0L 16V ABF - 150 hp
VW Passat B1 Type 32: 1.3L, 1.5L, 1.6L - 55 hp, 75 hp, 85 hp
VW Passat B3 (31/35i): 1.8L G60 PG - 160 hp, 2.0L (8V and 16V) 2E - 115 hp, 2.0L (8V and 16V) 9A - 136 hp

Made in Germany

Our Pro-Series 18.8 studs are manufactured in Germany and are subject to the strictest quality controls. Place your trust in German engineering expertise and improve the performance of your vehicle in the long term.
Experience the power and reliability of the Pro-Series 18.8 cylinder head studs and get the most out of your VW 16V EA827 engine. Order now and secure the decisive advantage for your vehicle!